主要是看人家的操作步驟,想學(xué)命令的人請(qǐng)看，十分有用 CF"3<*%x  
File > Open (locate saved Workshop 1 lens if it is not open already, digcam20_start.len) }8: -I Nj4  
Display > View Lens (accept defaults, click OK, keep window open) ;hJ*u  
In LDM spreadsheet, select surfaces 1 to Image J|24I4  
Choose Edit > Default Variables, then click in any cell to unselect the range vKC&Qi ;  
Right click in each cell and choose Vary for [i1D~rCcn  
Thickness of surfaces 1, 4, 6 `h!&->  
Glass of surfaces 1, 4, 6 ~[q:y|3b  
File > Save Lens p9WskYpm  
Using Quick Analysis tool bar, click… 8]\h^k4f  
Quick Spot Diagram (note scale) ! hr@{CD  
Quick Ray Aberration Plot (note scale) Gx_e\fe-/  
Quick Field Plot (note scales and maximum distortion value) 4>C=:w  
Analysis > Diffraction > MTF |7x^@i9w  
Freq/Calc Tab: Maximum 68, Increment 17 *8H;KGe=  
Graphics tab: Max plot freq 68 /exl9Ilt]  
Click OK (keep window open, tear off starting MTF graph for later comparison) d<? :Q  
Optimization > Automatic Design \Pmk`^T  
Output controls: Click Draw System button d}cJ5!d  
General constraints: Min center thickness 0.8, Min edge thickness 0.5 (others default) K0=E4>z,`q  
Specific constraints: wLe&y4  
Click Insert Specific Constraint \<x_96jt!\  
Default display is Optical Definitions, Effective Focal Length (correct choice) R6mJFE*6T9  
Enter 8.25 for Constraint Target 0]W]#X4A  
Click OK. VDjIs UUX  
File > Save Lens As (new name, digcam20_opt.len) nY-9 1q?Y  
Re-run View Lens window to see new lens picture. ,r
i--<  
Re-run each of the Quick Analysis windows and note scales. q.[[c  
Re-run the MTF window, compare to tear-off of starting point m+{: ^  
---------------------------------------------------------------------------------------------- A;a(n\Sy  
以下直接復(fù)制到命令行即可出最終結(jié)果 aEdJ