最近在設計超魚眼鏡頭,view angle 超過180度,在Zemax設定中會發生角度全反射的問題,請教各位先進,該如何解決呢? ]fY:+Ru  
|$tF{\  
Lens1:  Red光為200 deg ; Green光為180度. PdKcDKJ  

圖片:lens1.JPG

%5L~&W}^"  
R UCUEo63  
Lens2:Red光為200 deg ; Green光為180度;物距=infinity.   lGet)/w;c  

圖片:Lens2.JPG

create a dummy surface before the first lens surface and assign it a radius similar to the radius of the first lens surface and you should ge the rays from 100 half field of view display properly. i think you system design is a bit similar to  the example file, Wide angle lens 200 degree field.zmx in ZEMAX. If so I think there is a dummy surface already. Just change radius of the dummy surface shall put you right. &#C|  
>]B_+r0m^  
What you see in your second diagram is not TIR but the result od sequential ray tracing!! : )

能把這數據給發我嗎，謝謝，非商業用途，學生，QQ474240964