zemax可以做微光學分析么（lens小于0.5mm）

一個簡單的單鏡頭系統，如果鏡頭尺寸設到mm以上的話，分析沒有問題。但是我把整個系統都相應縮小，把鏡頭縮小到0.2mm左右的時候，layout上面的光線只能看到chief ray，別的光線要把光線數設到很高才能看到一些。是不是zemax在計算微鏡頭的時候計算誤差會比較大？？（我注意到它的unit最小只能設到mm級），有過類似經驗的朋友給點建議，謝謝

ecstasyjun	2008-03-04 20:22
我也想問個類似問題，頂下，希望有高手講解下下！

hopebox	2008-04-16 06:58
hi, I have tried the doublet file in ZEMAX and reduced the EPD and semi-diameter of surfaces to 0.2mm and 0.1mm respectively and I found that the 2D layout display properly. 8;YeEW5 [$_d\|Z Did you guys miss out something? N!>Gg\|@~ <>`+"O} please see the compressed file that contains a jpeg of the settings. [attachment=11647]

hoops

2008-04-17 04:46

I think that you two are doing two different things:

One is to change the lens diameter.
The other is to change the the aperture of the system, which is the right way.

引用第2樓hopebox于2008-04-16 06:58發表的 : qy=4zOOD#
hi, I have tried the doublet file in ZEMAX and reduced the EPD and semi-diameter of surfaces to 0.2mm and 0.1mm respectively and I found that the 2D layout display properly. @K/}Ob4
Did you guys miss out something? Tct8NG
please see the compressed file that contains a jpeg of the settings. [圖片]