各位大佬們，請教一下，這個動態(tài)加工因子如何理解，有什么作用！ 4=Ey\Px  
63HkN4D4  

圖片:1642580285(1).jpg

這個是麥克勞德幫助文件里的說明：Dynamic Tooling Factor: Reset for each Layer when cleared and the tooling factor is read from a table file then the tooling factor will be a function of the accumulating thickness of layers of the appropriate source. This simulates the gradual depletion of material from the source as coating deposition proceeds. There may be circumstances where the tooling factor should be a function of the individual layer thickness only. This will be selected when the box is checked. Then the accumulated thickness is set to zero at the start of each layer. This option applied only if tooling factor tables are in use. U\
ued=H  
6{'6_4;Fv(  
大意是說：用來模擬鍍膜過程中材料損耗造成的影響。

外語對我來說，真難

ouyuu:這個是麥克勞德幫助文件里的說明：Dynamic Tooling Factor: Reset for each Layer when cleared and the tooling factor is read from a table file then the tooling factor will be a function of the accumulating thickness of layers of the appropriate source. This simula .. (2022-02-23 19:37)  exO#>th1  

$n Sh[{  
大佬厲害啊，謝謝啦

tooling factor 動態(tài)隨藥材變化而變的問題，某知名高校曾做過試驗，不易找到規(guī)律。 M&/aJRBS  
常見光控片或晶控片居中(不動)放置的膜厚間接控制方法，是此問題的來源之一。 3 t8